ONT With CATV Port

ONU - ONT With CATV port

1ge + 1fe WiFi + CATV + Phone Gpon Xpon ONU

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

ONU - ONT With CATV port 

1ge + 1fe WiFi + CATV + Phone Gpon Xpon ONU






1 × 10/100 / 1000Mbps Ethernet, 1 x 10 / 100Mbps Ethernet, 1 SC / APC Connector, 1 FXS Connector, 2.4GHz WIFI, 1FXS FJ11 Connector, Plastic Casing, External power supply adapter

Functional Characteristic 

Supports ONU auto-discovery / link detection / remote software update, WAN connections supports route and bridge mode. Route mode supports PPPoE / DHCP / Static IP, supports WIFI interface and multiple SSIDSup POTS interfaces for VOIP service, CATV interface support for video service and control by OLT, QoS and DBA support, Port support Isolation and configuration vlan port, Support Firewall function and IGMP Snooping / Proxy multicast function, Support LAN IP and DHCP server configuration, Support port forwarding and loop detection, Support Remote configuration TR069 and maintenance, Specialized design for failure prevention the system to maintain a stable system.


It is designed as HGU (Home Gateway Unit) in different FTTH HDV solutions. The carrier class FTTH application provides access to the data service.
It is based on mature, stable and profitable EPON technology. You can access the main EPON OLT.
It adopts guarantees of high reliability, easy administration, configuration flexibility and good quality of service (QoS)
to meet the technical performance of EPON CTC3.0.


Plug and play, integrates automatic detection, automatic configuration and automatic firmware update;

Supports flexible QinQ VLAN, DHCP Relay / Server and IGMP / MLD multicast monitoring function;

Supports remote fiber optic remote monitoring and diagnostic monitoring;

Supports Wi-Fi 802.11n (T / R) function;

NAT support and firewall function;

WAN supports network bridge, route, and mixed mode bridge / route;

1G full speed non-blocking switching

2048 MAC address table

Supports VLAN, transparent, tag, translation, trunk, etc.

Integrated port monitoring, port mirroring, port speed limiting, port SLAs, etc.

IEEE802.1p QoS integrated with four-level priority queues

Supports IGMP IPv4 / IPv6 inspection and MLD inspection

Supports mixed bridge, route and bridge / route mode

Technical items Details
PON interface 1 G / EPON port (EPON PX20 + and GPON Class B +)
Receiving sensitivity: ≤-27dBm
Optical transmit power: 0 ~ + 4dBm
Transmission distance: 20 km
Wavelength TX: 1310nm, RX: 1490nm
Optical interface SC / APC connector
POTS interface 1 FXS, RJ11 connector
Support: G.711 / G.723 / G.726 / G.729 codec
Support: T.30 / T.38 / G.711 fax mode, DTMF relay 
line test  according to GR-909
LAN interface 1 x 10/100 / 1000Mbps and 1 x 10 / 100Mbps self-adaptive Ethernet interfaces. Full / medium, RJ45 connector
CATV interface RF, optical power: + 2 ~ -18dBm
Optical reflection loss: ≥45dB
Optical Receive Wavelength: 1550 ± 10nm
RF frequency range: 47 ~ 1000MHz, RF output impedance: 75Ω
RF output level: 78dBuV
AGC Range: 0 ~ -15dBm
MER: ≥32dB @ -15dBm
Wireless Complies with IEEE802.11b / g / n,
Operating frequency: 2,400-2.4835 GHz
Supports MIMO, rate up to 300Mbps,
2T2R, 2 external 5dBi antennas,
Support: Multiple SSID
Channel: auto
Modulation type: DSSS, CCK and OFDM
Coding scheme: BPSK, QPSK, 16QAM and 64QAM
LED 12, for the status of POWER, LOS, PON, SYS, LAN1, LAN2, WIFI, WPS, Internet, FXS, Worn, Normal (CATV)
Press the button 3, for reset function, WLAN, WPS
Use condition Temperature: 0ºC ~ + 50ºC
Humidity: 10% ~ 90% (without condensation)
Storage condition Temperature: -30ºC ~ + 60ºC
  Humidity: 10% ~ 90% (without condensation)
Power supply DC 12V / 1A
Energy consumption ≤6W
Dimension 155mm × 92mm × 34mm (L × W × H)
Net weight 0.24Kg