

SC / APC Quick Connector for FTTH networks, Pack of 10 Units.
SC / APC Quick Connector for FTTH networks, Pack of 10 Units.
Characteristics:
1) Pre-assembled at the factory.
2) No epoxy or polishing required, No special tools needed when installed.
3) allows up to three retest results.
4) easy installation, fast and easy fiber termination in the field.
5) It only takes 30 seconds to learn the installation and manufacturing process.
6) profitable.
7) Quick connection and repeat, No special tools needed when installed.
8) can be done on site.
9) Eliminate excess cable length and storage of pigtail splices
10) Can be pasted and mapped repeatedly to avoid loss.
The applications
1 patch panel
2 Distribution
3. Emergency maintenance or restoration of fiber networks
4 FTTH Network
5. Desktop connection for LAN environments
6. Fiber optic and pigtail patch cord
7 Telecommunication devices
8. Data communication networks
9. Fiber optic LAN and access network
10. Industrial and military applications
Data sheet
Item |
Technical parameters |
Applicable for |
Drop cable / indoor cable |
0.9mm Adjusted Damping Fiber, 2.0mm, 3.0mm Drop Cable |
|
Fiber optic diameter |
SM (9/125) MM (50/125 / 62.5 / 125) |
125μm (657A and 657B) |
|
Strong diameter |
250μm |
Fiber mode |
Single mode |
operation time |
100 s ( Not the fiber ) |
Insertion loss |
≤ 0.3dB ( 1310nm and 1550nm ) |
Return loss |
> 50db (PC)> 55db (UPC)> 65db (APC) |
Bare Fiber Holding Force |
> 5 N |
Clamping force of bare fiber support |
> 10 N |
Tensile strength |
> 50 N |
With temperature |
-40 ~ + 75 ° C |
Tensile strength in line (20 N) |
IL ≤ 0.5dBRL ≤ 5dB |
Mechanical durability (500 times) |
IL ≤ 0.5dBRL ≤ 5dB |
Drop test (drop height 4m, once per direction, fully 3 times) |
IL ≤ 0.5dBRL ≤ 5dB |